Contents (Click To Jump)
- 1 What Are The Most Common Plumbing Issues In Tucson?
- 2 How Does The Water In Tucson Affect Your Plumbing?
- 3 How Much Does Plumbing Usually Cost in Tucson?
- 4 Can Better Plumbing Save You Money In Tucson?
- 5 When Should You Call The Water Utility Company In Tucson Vs Hire a Plumber?
- 6 When Do You Need Permits For Plumbing Service in Tucson?
What Are The Most Common Plumbing Issues In Tucson?
Surrounded by mountain ranges, Tucson sits in the Sonoran Desert. While the area doesn’t see many natural disasters, such as flooding or hurricanes, the summers are hot and dry. Tucson gets most of its water from the aquifer under the city and the Colorado River, so there’s always the chance of drought. Tucson strives to always have a plan in place should that happen.
With mild temperatures during the winter, the most common plumbing issues in Tucson are the same as many homeowners find. These include:
- Running toilet: A running toilet can use 30 plus gallons of water in an hour. As your toilet ages, the flap that keeps the water in the tank can begin to break down or stop settling in the correct spot when you flush.
- Leaks: A leak can occur anywhere that there are water pipes in your home or yard. You may discover you have a leak when your water bill goes up dramatically. These need to be found and fixed quickly to minimize water damage.
- Clogs: Dirt, oil, food particles, and hair flow through your drains. Sometimes, they get caught and build up, creating a clog. If not taken care of, clogs can lead to pressure build-up and burst pipes.
Our team has the experience you need to take care of these common plumbing issues and even the unexpected ones.
How Does The Water In Tucson Affect Your Plumbing?
Most of the water in Tucson comes from wells that tap into the aquifer that sits below the city. Because the water in Tucson comes from a well, it’s naturally hard water. Hard water is water with an abundance of dissolved minerals in it, such as calcium and magnesium. You may notice some unsightly stains in your toilet, shower, or bathtub due to hard water.
So what does hard water mean for the plumbing in your Tucson home? With hard water, you may find that calcium builds up in your appliances, including your water heater. This may cause problems that cause you to replace it sooner than you might have. Also, hard water clogs the home’s showerheads and taps. You might notice that the water doesn’t run smoothly out of your taps but seems to sputter instead.
How Much Does Plumbing Usually Cost in Tucson?
In Tucson, our plumbers work on two different types of plumbing, repairs and new construction. We find that most of our customers are looking for repairs and emergency service. In the Tucson area, you can expect to pay for the cost of labor as well as the costs of the products. The average costs for labor in the area range between $80 to $130 per hour.
A lot of the costs for plumbing depend on the item that’s repaired or replaced. If it’s a simple clog, you’re only paying for labor, but when you need a new water heater, you pay for labor and the cost of this appliance. The average cost of a plumbing job in the area is $237 with an average range between $123 – $350.
Of course, it depends on the type of plumbing job. You might opt for a high-end water heater or faucets that bump the cost up. There are other factors to costs that include:
Cost Factor: Location of the Issue
One of the biggest cost factors is the location of the issue. For example, if you need a new water heater and the old one is located in the garage, it’s easy to replace. However, if it’s located under the home in a crawlspace, it’s much harder for us to reach and takes more time to replace.
In Tucson, most of the homes are built on slab foundations. This makes it more difficult to renovate or move the way the pipes flow through the home. This can add costs to your bill.
In some cases, our technicians might need to access pipes that are behind walls. It might require cutting into the drywall and replacing it once the pipes are replaced or repaired. Leaks and burst pipes can also occur in your yard where they lead into the home.
A repair in these areas can affect the cost because of the time it takes to dig and locate the pipes. There may be a need to expose a few feet of pipes or even dig the entire length of the yard where the pipes are buried. This takes time, so the location of the problem is a large cost factor.
Cost Factor: Products Required
Another considerable cost factor is products. If our plumbers need to remove a clog, you don’t need to worry about the costs of products. However, if you need a new kitchen faucet, then the product plays an important part in the costs of the visit. In some cases, you might prefer a high-end product, such as a kitchen faucet with an included sprayer.
The material of the products can increase costs. It’s up to you to choose the showerhead or toilet you want to be used in a replacement, but you need to be aware that the manufacturer, quality, functions, and material can drive your plumbing bill up.
In some cases, choosing a high-end replacement can extend the lifespan of the product so that you don’t need to replace it as soon as you might have with a lower quality product. You need to find a balance between cost and quality to ensure that you don’t need to replace or repair the same item in a couple of years.
Cost Factor: Tuscon Regulations and Codes
Local rules and building codes play a large part in the cost of your plumbing repairs. In an effort to protect citizens and ensure a basic level of quality, each city, county, and state has its own rules and regulations concerning plumbing and building. These codes guide the amount of work that needs to be done in some cases.
For example, the pressure of the water entering your home might be too high for our technicians to work on your plumbing. When this happens, before work can begin, our plumber installs a regulator outside the home that reduces the water pressure entering the pipes in the home. Unfortunately, installing the regulator adds to the cost.
In Tucson, homeowners need a permit for many things. If you’re renovating your bathroom or kitchen, you’ll need a permit. A water heater installation requires one too.
However, most building codes and local regulations are designed to protect your investment in your home. In the example above, if your home’s water pressure is that high, it’s possible that it might cause a pipe to burst.
Can Better Plumbing Save You Money In Tucson?
Yes, better plumbing can save you money. First, updating your appliances, such as the dishwasher and water heater, almost guarantees that you’ll enjoy better water and energy efficiency. Not only does this lower your carbon footprint, but it saves you money on your monthly utility bills.
Second, did your mom tell you that you get what you pay for? It’s true. When you opt for better appliances, better pipes, better materials, and better plumbing service like Mr. Blue Plumbing, you’re going to increase the lifespan of your pipes, faucets, and appliances.
In the case of plumbing services, you need someone that you can trust to do the job correctly the first time. If something isn’t repaired correctly or the issue isn’t identified, you’ll end up paying for multiple companies to come out before the issue is resolved. You might end up fixing more “problems” than you had to begin with. Our master plumbers will help avoid this.
When Should You Call The Water Utility Company In Tucson Vs Hire a Plumber?
When you’re in the middle of a crisis, and water is gushing from somewhere it shouldn’t, it’s hard to know if it’s a water company problem or a hire-a-plumber issue. Here are a few things to consider.
If it’s going on within your home or on your property, it’s probably time to hire our plumbers. The water company doesn’t take responsibility for the maintenance and replacement of pipes in your home. This includes leaks, burst pipes, and replacement appliances and hardware. These are items that you as a homeowner are expected to maintain.
However, if you see water gushing out in the road in front of your home before your water meter or shut-off valve, then it might be a water main leak or break. In this case, you would definitely call the water company.
As a general rule, you should hire us if the problem is going on within your home or on your property. When the problem is going on beyond your water meter or water shut-off valve, it’s a good idea to call the local water utility company first.
When Do You Need Permits For Plumbing Service in Tucson?
In Tucson, it’s the homeowner’s responsibility to know what you need a permit for and to obtain one. If you’re building a new home and installing plumbing, our experts will take care of these things.
However, if you’re installing a new water heater in your home, you need a permit. When the plumbing service is part of a larger renovation, you’ll need a permit and may even need to submit a plan to the city of Tucson. It’s always a good idea to contact the city if you have any questions. Our specialists can also help.
Water can cause a lot of damage to your home. Whether you’re dealing with one of the most common plumbing problems in Tucson or something different, you need a plumbing service like Mr. Blue Plumbing you can rely on to provide you with quality work and quality products. When you need plumbing services or have questions, contact us today.