Contents (Click To Jump)
- 1 What Are the Most Common Plumbing Issues in Burnsville?
- 2 How Does the Water in Burnsville Affect Your Plumbing?
- 3 How Much Does Plumbing Usually Cost in Burnsville?
- 4 Can Better Plumbing Save You Money in Burnsville?
- 5 When Should You Call the Water Utility Company in Burnsville Vs Hire a Plumber?
- 6 When Do You Need Permits for Plumbing Service in Burnsville?
What Are the Most Common Plumbing Issues in Burnsville?
Burnsville has a rich cultural heritage and beautiful sceneries. The city is located south of the Minnesota River, boasts a friendly climate, and is buzzing with many activities.
The city infrastructure is amazing and serves a population of 61,339. Despite the infrastructural success, the city is plagued by plumbing issues.
That being said, the most common plumbing issues in Burnsville are due to aging pipes, (as a big chunk of housing was built in the 1960s), water quality, and weather. These bring about clogged drains, low water pressure, and leaks or pipe bursts.
Some of these plumbing issues are minor during the onset and can be easy to ignore, but eventually worsen over time. Therefore, it’s important to take prompt action when you notice any plumbing issue.
Clogged Drains
Burnsville experiences a significant amount of rainfall each year. Drains can clog during heavy downpours when leaves or trash find their way inside drains or when tree roots grow inside or around the drains. Other reasons for clogged drains include improper waste disposal food, soap scum, or mineral buildup.
Low Water Pressure
More often than not, low water pressure in Burnsville is due to mineral buildup in pipes due to the amount of minerals, like calcium and magnesium, in the water. Burnsville’s water quality report states that its water hardness is 20-26.2 gpg or grains per gallon. According to the Water Quality Association, anything over 10.5 gpg is considered very hard. We can help you prevent problems by installing a water softener.
Leaks
Low water pressure leads to an inadequate water supply to the kitchen, bathroom, or any other place where you need water. It may mean that you have one or more leaks in your pipes. This can be disappointing and costly in the long run, especially when you have to buy water from water vendors.
The water leaks problem comes in a myriad of ways and is common with many households in Burnsville with aging pipes. Older pipes are more susceptible to pinhole leaks and corrosion. If the leak is coming from a hidden pipe, you might see unusual meter readings and utility bills at the end of the month. The easiest way to detect a water leak is by checking for a dripping sound. This comes in handy for hard-to-reach areas. If you think you may have a leak, call us so we can find the problem for you.
Pipe Bursts
Water leaks occur when there are faulty washers and stoppers or when there’s a pipe burst. Here in Burnsville, our climate is cold and temperate, with about 4 months of the year close to freezing temperatures. This means that we’re more prone to pipe bursts. As water freezes, its molecules expand and create pressure within the pipes, pushing water towards the faucet. When it runs out of room, it will eventually cause the pipe to burst.
The pipes that are most at risk are those that are exposed and close to the outer parts of the home. We can help you prevent this problem by insulating your pipes.
Water Heater Problems
Water heater problems in Burnsville can be largely attributed to the water quality. Hard water means more minerals. Minerals can leave sediment in the tank that can lessen efficiency and cause your water bills to spike. Mineral deposits in water heaters can also cause a layer to form over time that makes it harder for heat to escape, which may eventually cause the heater to overheat and break. We usually recommend a water softener for that.
How Does the Water in Burnsville Affect Your Plumbing?
Burnsville relies on two sources of water supply. This is equivalent to over 3.2 billion gallons of water pumped to homes and businesses throughout the year. According to this study, the two water sources are groundwater and surface water.
Besides, the City is committed to providing safe and clean water for domestic and industrial use by following the federal and state water quality requirements. Therefore, the City strives to rid the water of lead, copper, nitrates, chlorine, fluoride, and other water contaminants.
The cost of disinfecting water can be expensive if you’re doing it 100% on your own. The good news is, the City wants to help you cut the cost. So, you can consume the water as it is when it gets to your taps.
Alternatively, we can help you install a carbon filtration system for the final cleanup. This is a sure way to guarantee you’re only consuming clean and safe water.
How Much Does Plumbing Usually Cost in Burnsville?
The cost of plumbing repair in Burnsville is anywhere between $109 and $792, with the average coming to $450. This cost includes labor fees, plumbing materials, and other minor costs like the ease of access to your location.
Labor Cost
We charge different rates according to experience and job complexity. Some jobs might require an hourly rate; others are flat-rate jobs.
Plumbing Materials
The cost of plumbing materials varies depending on the purpose and availability. So, if an item has to be imported, the cost is higher, compared to when we’re sourcing it locally.
Location
Accessibility can either lower or raise the cost of plumbing. If your home is easy to access, we will charge lower than when it’s difficult to get to.
Can Better Plumbing Save You Money in Burnsville?
Better plumbing goes a long way to prevent disappointments and unpleasant occurrences. Better plumbing involves hiring our team to diagnose problems and prevent possible problems from occurring.
To prevent mineral buildup in pipes, a water softener can help. This guarantees less to no mineral buildup in pipes, which can corrode them and lead to leaks.
To prevent occurrences like leaks, your pipes should be in good condition. Those in bad condition should be replaced. Proper insulation of pipes can help prevent pipe bursts, especially during the harsh winter season.
There’s always an option of going cheap when it comes to labor and materials. However, sooner or later, this turns out to be more expensive. Give us a call so we can help you improve your plumbing, even before you encounter any problems.
When Should You Call the Water Utility Company in Burnsville Vs Hire a Plumber?
You can call the water utility company in Burnsville when there’s a situation with your water meter or a sewage blockage. However, there are some caveats to this you should be aware of. When you call the utility company, they’ll assess the situation to determine if the blockage occurs in the city’s sewer main.
In that case, they’ll take full responsibility. However, if the blockage is coming from your property sewer main, you’ll need to give us a call. Also, when there’s a problem with the water meter, the utility company can be of help.
When Do You Need Permits for Plumbing Service in Burnsville?
According to the City of Burnsville, you need plumbing permits if you want to replace fixtures such as kitchen, bath and bar sinks, water heaters, sump pumps, showers, bathtubs, and toilets on your drain system. Our team would be more than happy to help you process these permits.
