Contents (Click To Jump)
- 1 What Are the Most Common Plumbing Issues in Clarksville?
- 2 How Does the Water in Clarksville Affect Your Plumbing?
- 3 How Much Does Plumbing Usually Cost in Clarksville?
- 4 Can Better Plumbing Save You Money in Clarksville?
- 5 When Should You Call the Water Utility Company in Clarksville vs Hire a Plumber?
- 6 When Do You Need Permits for Plumbing Service in Clarksville?
What Are the Most Common Plumbing Issues in Clarksville?
With the city growing more and more with each census, some plumbing concerns are more common than others in this area. Many homes within the 94 square miles that make up Clarksville are older and have some earlier plumbing systems in their homes. Because they have been used for many years, there is the expected wear and tear found throughout these homes. These issues develop due to the rising population and older architecture found throughout this historic city.
Water and Septic Upgrades
Because Clarksville has been a booming location for over a century, much of the construction and many of the homes in the city limits are older. With age comes the need to upgrade private water systems to match those infrastructure changes implemented by the local water distributor. In your personal home, there is a need to replace pipes and fixtures in your personal home so that you are not experiencing unwanted leaks that you can see and those you can’t. These pipes that need to be replaced are for both your water and your septic tank so that all of your waste is flowing properly and water is not sitting around your home.
Low Water Pressure
Whether the problem starts off gradually or happens overnight, low water pressure is a common issue found in Clarksville, TN. The first thing you need to do when you notice your water pressure is low is to check with your neighbors to be sure they are not having the same issue. If they do say that they are experiencing low water pressure, then you need to contact your utility company right away. If the problem is isolated in your home, then it is time to call our plumbing professionals.
Hot Water Heater Issues
Because many of these older homes in Clarksville are decades old, one of the most common issues our team witnesses regularly is water heater issues. Either the water temperature is not warming up, it is not lasting as it has in the past, you may need some maintenance. If your water heater operates off of gas, make sure your pilot light is on. Also, reset the thermostat to the appropriate temperature. If you have tried these things and you still do not have hot water, our team of professional plumbers can go in and see what the issue is in your hot water. Maintenance may be required depending on the age, and you may need a new water heater.
Constant Clogged Drains
Another issue that develops throughout Clarksville is the dreaded clogged drain and toilets. In most cases, the clogging begins with a slow drain, allowing water to get through, but the movement is slow. Depending on what has been flushed or dropped into these drains, they could cause a backup in your water system. You may not see what is clogging your drain, but the water backup in your sink, toilet, or even shower can indicate that something is lodged somewhere in your system and needs to be removed.
While some residents use liquid chemicals to break down and clear the drains, these products are often not helpful and only add to the buildup. If you have noticed that your drains are slowly draining water or have a direct clog, you need plumbing professionals to intervene. Small items and toys are easily dropped down the sink by children, or we can bump something in the toilet, flushing before we ever realize it.
How Does the Water in Clarksville Affect Your Plumbing?
Since companies like Clarksville Gas & Water and Cumberland Heights Utility District upgraded their water system to stream the best water through your home pipes, the water supplied through Clarksville comes from the Cumberland River and other local watering sources and springs. This is known as surface water filtered through the water systems at the above utility companies.
While this water is safe to drink, the minerals that come through the water will eventually cause corrosion in your water system. Over time, the surface water can affect the pipes inside your home and those connected to the water supplier. With quality plumbing and regular maintenance, the surface water will have minimal impact, and your plumbing system can last for years before being replaced.
How Much Does Plumbing Usually Cost in Clarksville?
While there are different plumbing costs and services, the average cost that residents in Clarksville, TN, are spending regularly is around $400 to $500 per service. While some of these costs are quick fixes, some cost significantly more, and there are reasons for these cost differences.
Each plumbing service comes with a requirement for a different type of material. Whether you need pipes, plumbing fixtures, or other materials replaced will contribute to the overall cost of your plumbing service. Also, any materials required for removing or unclogging a drain are considered in the needed materials.
Not all services require the same time frame, and labor for plumbing costs are a significant portion. We offer an hourly rate, so depending on how long the job lasts, the labor costs could increase or be less for smaller jobs. Labor could also increase on a job if more than one of our plumbers is required for the service. Some jobs require plumbers to go lower than your sink counter and under your home. They may be required to go back and forth during the plumbing service to identify and correct the issue. Labor costs are essential because many of these jobs require a set of skills that many residents do not want to use when it comes to plumbing.
Type of Plumbing Service
Some plumbing service jobs are quick fixes. More common services often come with a standard rate and are easier to manage. Services that require your plumber to order parts and make unexpected installations once the job is revealed can cost more than others. While you may think you have a leaky pipe, the service may require an overhaul of several pipes and provide unexpected costs.
In most cases, the services in Clarksville are smaller, tightening up loose pipes and removing items from them that are causing a delay in drainage. When your home needs a larger replacement, such as a new water heater, though, the price will be higher.
Whether your plumbing service is an emergency or scheduled out during regular business hours will affect your overall cost. Rates for labor and services are based initially on standard services, but sometimes emergencies in the plumbing world arise. If you need to have a service done quickly or even after regular working hours, there is an added fee associated with the overall cost of the service.
Can Better Plumbing Save You Money in Clarksville?
Having quality plumbing in your Clarksville, TN home is essential for your quality of life. When you maintain your plumbing system, you keep it flushed from contaminants that can cause unwanted leaks and corrosion in your home. Instead of patching up parts of the plumbing to get a quick fix and save a few extra dollars, you can cost yourself more money in repairs in the near future by taking the cheap way out.
Upgrading your plumbing periodically allows you to have a more energy-efficient system, reducing the cost of your plumbing, water costs and saving you money all around. Your system will last you longer when it is maintained and allow you to use the appropriate amounts of water. You do not have to worry about wasting water during leaks and costing you more money on your water bill each month. With energy-efficient parts and materials, your plumbing system will also use less power, reducing your energy costs and saving you money in that aspect, also.
When Should You Call the Water Utility Company in Clarksville vs Hire a Plumber?
There are times when you do not need a plumber, but you actually need the water utility company to come out and investigate the issue. One of the most common issues that plumbers get regarding utility companies is cloudy water. This is related to the filtration system within their system, so they need to be contacted directly.
If you and your neighbors have noticed significantly lower water pressure and cannot find leaks on your personal property, then there is something amiss with either Clarksville Gas & Water or Cumberland Heights Utility. Depending on which utility company your neighborhood uses for a water source, you will need to reach out to their service department and notify them of any issues you have to identify the issue within their system. Plumbers are not able to work on utility water systems for any issues.
When Do You Need Permits for Plumbing Service in Clarksville?
Some plumbing services require a permit before you can continue moving forward with the service. Before you have a new septic tank installed or have a large plumbing construction project done on your property, you will need to contact the City of Clarksville Gas & Water department to inquire on what permit is needed for the service.