Contents (Click To Jump)
- 1 How Much Does Reverse Osmosis Installation Usually Cost in Bend?
- 2 What Are the Most Common Water Contaminants in Bend?
- 3 Can Residents in Bend Benefit From Reverse Osmosis Treatment?
- 4 How Often Should Residents in Bend Replace Reverse Osmosis Prefilters?
- 5 Do You Need a Water Softener With Your Reverse Osmosis System in Bend?
How Much Does Reverse Osmosis Installation Usually Cost in Bend?
The cost of reverse osmosis system installation in Bend will include both the cost of the equipment itself and the labor needed to install it. There are various systems out there, depending on your needs, so you can end up spending anywhere from $150 to $3,000 for a residential system. Commercial systems can cost $10,000 or more. However, most homeowners in Bend can expect to spend around $1,500 for their reverse osmosis system installation. That cost may go up or down depending on the system you want, the filtration you need, and how long the installation takes.
The Type of System You Want
When choosing your RO system, you’ll need to decide between these two options:
- Point of entry systems. These are also known as whole-house reverse osmosis systems. They are the more expensive option, but they’ll provide filtered water to every area of your home instead of just your drinking water. You’ll use RO water for washing dishes, taking a shower, and in your washing machine. These systems require more installation time and will take up more space in your home. However, for people with certain medical conditions such as immune deficiencies, they can be essential for health and well-being. There is evidence that some contaminants can get into our systems by drinking water and activities like taking a shower.
- Point of service systems. These may also be known as single tap systems. These systems offer dedicated filtering at a single water source in your home. They are most commonly installed at the kitchen sink, as this is where you consume the most water, either for cooking or drinking. These systems are much smaller and sit underneath the sink in the cupboard. They are less expensive, but they also only filter water at a single source in your home. For most households in Bend, though, these systems are sufficient.
If you aren’t sure which system is right for you, talk to your Bend plumber. They can walk you through the pros and cons and the pricing differences to help you make the decision that’s best for your household.
How Much Filtration You Need
Most reverse osmosis systems have between three and five filtration stages. The more filtration stages you have, the more expensive the system is going to be. Bend benefits from a pretty clean water source, so most households will find a three or four-stage system to be adequate. This should provide you with plenty of fresh, clean water without overtaxing your filters.
About 23% of Oregonians get their water from wells. If you are one of them, you should consider a five-stage system. Five-stage systems include an additional stage that filters sediment from the water. This will not only provide you with a better end product, but it will help your reverse osmosis system and all its filters last longer. The system will cost you a little more, but you’ll end up saving in the long run on replacement costs.
How Long Installation Takes
Installing a reverse osmosis system is a pretty quick job for most Bend plumbers. You should expect the work to take between one and three hours. In some older homes, like the ones you’d find in the Drake Park neighborhood, the installation may take a little longer. Older plumbing systems don’t always automatically work with RO systems. Your plumber may need to make some slight adjustments to your pipes. However, it’s still possible to fit these filtration systems in older homes. That’s a good thing, too, because many of these older homes may have older pipes contributing to the amount of contamination in the water.
Most plumbers in Bend charge around $60 an hour for labor, but they’ll include their time at a flat rate for the installation.
What Are the Most Common Water Contaminants in Bend?
The EPA sets safety standards for more than 90 contaminants in drinking water. The City of Bend has to test the water annually to ensure it’s within those safety guidelines. They also publish the results of their water quality testing every year. In the latest results, Bend’s water met the minimum safety requirements in all areas. But that doesn’t mean there were no contaminants found.
In fact, there were ten contaminants found in Bend’s water. Four of those were above the limits set by the Environmental Working Group (EWG), a nonprofit organization dedicated to clean drinking water advocacy. The four contaminants of concern are:
- Hexavalent chromium, or chromium 6. This is a toxic chemical that gets into the water from industrial pollution. It’s also a known carcinogen, meaning it’s linked with increasing the risk of developing certain types of cancers. The EPA doesn’t currently limit the amount of chromium 6 specifically. Instead, they combine it with chromium 3, which is a chemical essential to human development.
- Haloacetic acids. These acids are a byproduct of the use of chlorine in the water treatment process. High levels of these toxins may cause cancer and birth defects, as well as skin irritations for those showering or bathing in the water.
- Radium. Radium naturally occurs in rocks, so it may leach into water as the water passes through the ground or sits in underground aquifers for long periods. You don’t absorb radium through the skin, but it can get into your system when you drink it. While low levels shouldn’t do any harm, those exposed to high levels of radium over a long period may develop certain cancers as well as anemia, cataracts, and issues with their immune system.
- Trihalomethanes (TTHMs). These are also by-products of the water treatment process left behind after the use of chlorine to clean the water supply. They may also get into the water supply from industrial sites and are an environmental pollutant. These are also linked to an increased risk of cancer, specifically bowel, bladder, and brain cancers.
Can Residents in Bend Benefit From Reverse Osmosis Treatment?
The EWG recommends using reverse osmosis systems to remove or reduce contamination in water, including the contaminants most often found in Bend’s water supply. Along with removing chromium, radium, haloacetic acids, and TTHMs, a reverse osmosis filter can also reduce or remove:
And more from your drinking water.
Water contamination doesn’t only occur within the city’s water supply, either. Reverse osmosis filtration can also help with:
- Contamination within your own home. A lot of older homes in Bend have galvanized steel pipes. After a few decades, the zinc coating inside these pipes can start to wear away, and the pipes will start to corrode. You might see flakes of rust, iron, or have discolored water. While these materials aren’t harmful in small amounts, it’s probably not something you want your family to have a lot of. Reverse osmosis can remove these substances and deliver freshwater, no matter what’s happening in your pipes.
- Contamination in your well water. If you use well water in your home, you are responsible for monitoring the water quality yourself. You can treat it, but it’s tough to be sure the quality is consistent when coming straight from the ground. Reverse osmosis can provide you with peace of mind. You’ll know no matter what’s happening in your well that your family is drinking the cleanest water possible.
Reverse osmosis systems can also help protect you in emergencies and unexpected events. If the city’s water treatment system goes down, they run out of cleaning treatments, or a natural disaster disrupts the water supply, you’ll be able to rely on your system to protect your family.
How Often Should Residents in Bend Replace Reverse Osmosis Prefilters?
There are several filters and membranes that you’ll need to replace in your RO system periodically. These include:
- Prefilters replaced every six to nine months
- Post filters replaced every year
You should replace membranes every three to five years if you are one of the Bend households using city water. If you use well water, you’ll want to replace your membranes more often, probably every one or two years. That’s because well water in Bend has a higher mineral content, so it will wear out the membranes faster.
Replacing these three items on a consistent schedule will keep your water fresh and clean. It will also help extend the life of your reverse osmosis system.
Do You Need a Water Softener With Your Reverse Osmosis System in Bend?
Bend’s water has a hardness of 1 to 1.5 grains per gallon. This is considered soft or slightly hard water. Because of this, it won’t be necessary for most households to pair a reverse osmosis system with a water softener. If you use well water or struggle with hard water issues in your home, talk to your Bend plumber about a water softener. Hard water can cause issues with your plumbing fixtures and can wear out your appliances much faster. The two systems can work together to provide you with the freshest, cleanest water possible.