Contents (Click To Jump)
- 1 What Are the Most Common Well Pump Repair Issues in Parker?
- 2 What Factors Cause Premature Well Pump Failure in Parker?
- 3 How Much Does Well Pump Repair Usually Cost in Parker?
- 4 How to Avoid Costly Well Pump Repairs in Parker?
- 5 When Do You Need Permits for Well Pump Repair in Parker?
What Are the Most Common Well Pump Repair Issues in Parker?
If your water supply suddenly becomes discolored, sputtery, or if it disappears completely, it may be time to call a plumber. Here are the most common issues we see when we’re called to handle well pump repair in Parker.
No Water in the House
If you suddenly find yourself without water, your well pump may be to blame. In some cases, it’s as easy as resetting your breaker since your well pump can cause it to trip. If that doesn’t work, a licensed plumber will be able to diagnose and treat the issue. They can check the pump’s depth, and if it’s in the wrong location, they’ll place it deeper in your well so it can better access water. If the pump is old, it may just be time to have it replaced. They typically last around 15 to 20 years.
Sputtering Water From the Faucet
If your water sputters out of the faucet when you turn the knob, it can indicate a problem somewhere along the line. The sputtering sound signifies that air has entered your water supply, whether through a cracked pipe or faulty pump. A licensed plumber can inspect your pipes to see whether one needs to be replaced, and if your pump’s the culprit, they’ll recommend whether it needs to be repaired or replaced.
If your water isn’t coming out crystal clear, you’ve got an issue that needs to be dealt with immediately. Sometimes, this issue indicates that your water level is low, and the well pump pulls silt and sand into your pipes. Sand can be incredibly abrasive, and it will quickly damage your well pump, causing it to fail and need replacing. In other cases, minerals like iron and magnesium can leech into the water supply, causing the water to become discolored. A licensed plumber in Parker can inspect your well pump and test your water to find the problem quickly.
In older homes, old pipes can become corroded, and contaminants can leak into your tap water, causing it to look murky. In these cases, a licensed plumber may recommend having your pipes replaced since pollutants can be dangerous when ingested. We can test your home’s well water to find the problem and ensure your family’s safety.
Unusually High Electric Bill
If you notice a sudden increase in your electric bill, it may be due to a faulty well pump. When a well pump isn’t working correctly, it can constantly run, costing you hundreds of dollars on your utility bill. If this happens, you’ll need to have your well pump inspected by a licensed plumber in Parker who can determine whether it needs to be repaired or replaced. A higher-than-normal electric bill can also indicate that your pressure switch is malfunctioning.
Frozen Well Water
Parker experiences frigid winters, with average temperatures remaining below freezing from December to February. Wells are usually well-insulated, but they are prone to freezing in the chilly Colorado winters. Unfortunately, when a well pump freezes, the cycle of freezing, thawing, and freezing again can cause significant damage. Most household plumbing, including pipes and well pumps, aren’t made to expand and contract, and a frozen well pump can crack under pressure. If this happens, you’ll have a plumbing emergency on your hands that can be very expensive. We usually recommend having well pumps inspected and insulated before winter hits to prepare your plumbing for the dropping temperatures.
What Factors Cause Premature Well Pump Failure in Parker?
Most homeowners don’t think about their well pumps until they stop working. To stay ahead of expensive and inconvenient issues, consider the following factors that can contribute to premature well pump problems in Parker.
Low Water Quality
If you notice your water pressure decreasing or if your water gets murky and gross, it’s time to call a licensed plumber for help. Often, homeowners ignore these kinds of problems since they’re not emergencies, and they end up with a costly problem down the line. If your water is discolored, it can indicate that sand and sediment are present in your water supply, and not only is that dangerous to your family’s health, it can also cause your pump to become damaged or fail. In the same way, low water pressure can be a sign that your pipes are corroded, clogged, or need to be replaced. If ignored, they could potentially burst, leading to a costly plumbing emergency.
If you’re ready to have a new well installed or your old well pump replaced, make sure you hire a licensed professional to get the job done. We’ve repaired many wells that were installed with low-quality materials, and they just don’t last. Similarly, poor pump installers can cut corners during the installation process, leaving you with costly problems throughout the years. Make sure you hire a trusted plumber for your well pump repair in Parker so you can be confident that your well and well pump are installed correctly and with the highest quality materials.
Most often, homeowners don’t think about their plumbing daily, but that’s just fine since well pumps are designed to be dependable. Problems arise when homeowners don’t think about their plumbing and forget to provide regular maintenance to their wells and well pumps. If you notice an issue with your water supply, it’s essential to call a licensed plumber at the first sign of a problem. That way, you can ensure that your well pump will live a long, healthy life. If you ignore minor issues, they can quickly become big ones that are both very expensive and extensive to repair.
How Much Does Well Pump Repair Usually Cost in Parker?
You can expect to pay around $800, on average, to have your well pump repaired in Parker. Unfortunately, the price range for well pump repair can be anywhere from $200 to over $1,500. Many factors contribute to your final price, and it’s always best to call around for quotes before beginning your project. Here are the most common elements we use to calculate a final price for our clients.
Well pumps do a lot of work, and your well’s size will determine the type of pipe you’ll need. If you’re having your well pump replaced, we’ll need to consider your well’s size, shape, and depth to get you the pump that will work effectively with your home plumbing setup. If your well is very deep, it may also be challenging to access the pump, and if that’s the case, your price will probably be a little higher as there’s more labor involved. On the other hand, a shallow well will allow us to access your pump much more quickly.
Well Pump Type
If you need to have a new well pump installed, we’ll need to choose which type works best in your system. There are several types of well pumps on the market that have many advantages. A jet pump, for example, is easy to install and maintain since it’s located above your well. On the other hand, a submersible pump is installed deep inside your well and is harder to access. They come at several price points that will reflect in your final installation bill. We’ll discuss all the pros and cons of each option so you can make an informed decision about which well pump is best for your home.
How Much Maintenance Is Needed
If your well is in severe disrepair or if it is very old, you’ll probably need to pay to have it replaced. We will add the cost of your new pump to your final bill. In other cases, you may need to pay to have your well pump and pipes inspected, or you may need to have pipes replaced. You can expect to pay an hourly rate for your plumber’s time, and the longer they’re working, the more you will pay for their services.
How to Avoid Costly Well Pump Repairs in Parker?
As with most home repairs, it’s always best to take care of things at the first sign of a problem. Prevention is critical, and you’ll pay far less to properly maintain your well pump than if you wait until something significant happens. For example, if you notice murky water, have a licensed plumber look at your well pump. If you avoid the issue (that may be minor), you will risk causing your well pump to work harder than it should, and you’ll end up needing to have the entire pump replaced. Take a few steps to keep your well pump running smoothly, and you’ll avoid major repairs down the road.
When Do You Need Permits for Well Pump Repair in Parker?
If you are having a new well installed on your property or if you’re replacing an old well, you’ll need to apply for a permit with the state of Colorado before any work begins. They require particular standards to be met for well installation. If you’re only looking to have maintenance done on your well or need to have your well pump repaired in Parker, you don’t need to obtain a permit for the work.
Since Parker is located in the Denver Basin, you must obtain additional requirements before installing a well on your property. You’ll need to get Denver Basin Groundwater Rights through the Department of Resources at the Colorado Division of Water Resources. You can do that by applying online on their department’s web page.