Contents (Click To Jump)
- 1 What Are the Most Common Well Pump Repair Issues in Windermere?
- 2 What Factors Cause Premature Well Pump Failure in Windermere?
- 3 How Much Does Well Pump Repair Usually Cost In Windermere?
- 4 How to Avoid Costly Well Pump Repairs in Windermere?
- 5 When Do You Need Permits for Well Pump Repair In Windermere?
What Are the Most Common Well Pump Repair Issues in Windermere?
Windermere is located in Orange County, making it part of the Orlando Metropolitan area. Its location also makes it a popular place for people to want to live out their lives. It is predominately a residential development and has been since 1889.
One of the best things about Windermere is the fact that it is mainly surrounded by water. There are only 1.56 miles of land that is surrounded by four lakes. They are:
- Lake Down
- Lake Bessie
- Lake Butler
- Wauseon Bay
With all the lakes and water, you may not stop to consider where your water comes from. However, according to Orange County, the primary water used is from the Floridan Aquifer. According to the Annual Drinking Water Report for 2021, this aquifer is “primarily fed by rainwater that is filtered through hundreds of feet of sand and rock in a natural filtering process.” What does this mean for you? What does it mean for your well and pump?
The truth is, several things can go wrong with your well pump. Some of the most common issues are:
- Unpleasant taste, smell, or color: Some water companies will add chlorine to the water supply to eliminate the risk of bacteria. The chlorine can leave your water tasting and smelling “bleachy.” If you have other foul odors in your water supply, it could indicate other issues. A metallic taste or smell may mean you have rust in your water supply. Just a bad flavor or a rotten egg smell; this could be buildup or bacteria.
- Low water pressure: If you have a well and lose water pressure, it could be a problem with your system. There could be clogs in the pipes, low water, or other issues that involve your pump’s ability to get water out into the holding tank efficiently.
- Pump running for a longer time: Is it taking a long time for your pump to kick off after it kicks in? This delay could indicate that it is not working correctly or that the water isn’t there the way it should be. You will need to have a professional like us come check it out for you.
- Lost power to pump: Your pump, as with other things, does rely on electricity to perform. Lightning strikes nearby, and bad wiring or a breaker issue can all cause it to stop working. You may need to trace the problem yourself if you can. However, it is recommended that you hire an electrician or our plumbers to handle it if you aren’t experienced with electrical issues.
- Faulty air bladder or pressure tank: If you hear your system kick in or out frequently, even in the middle of the night when everyone is sleeping, you could have issues. Your bladder or tank may not be efficiently holding water, causing your pump to work too hard. You could also have an unknown leak that is causing the pump to work harder to keep the tank filled.
The aquifer is fed by rainwater which poses a unique challenge and a particular risk to your well pump if it isn’t deep enough. Even the slightest fluctuation in rainfall can diminish the water supply. If your pump starts to run dry, and you do not notice, irreparable damage can be done, and it could ultimately stop working correctly.
What Factors Cause Premature Well Pump Failure in Windermere?
There are several concerns about factors that may negatively impact your well pump. Even the risk of salt in private wells can cause a lot of trouble for your system and your health if you need a low sodium diet. This risk mostly comes from the fact that our aquifer is mostly groundwater and its proximity to both the Atlantic and Gulf Coasts.
Hard water may also be a problem that diminishes the lifespan of your well pump. Whether you have a private well or use the City’s water, there is always a chance for your water to be hard in Windermere. You will know it based on how your skin feels, especially over time. You could notice:
- Stains in sinks or tubs
- Dry skin and scalp
- Residue on dishes
- Limescale on faucets
- Low water pressure
- Clothing loses color and softness
Other issues that can cause your well’s pump not to last the expected 15-20 years include:
- Poor water quality. If your well water has a lot of calcium, magnesium, and other chemicals in it, it can work as a corrosive. Your in-home appliances may suffer, and your well and pump may as well.
- Lightning and power failures. Most appliances need a power source. If your well pump isn’t getting electricity or has recently been struck by lightning during a hurricane or tropical storm rolling through the area, you may not get water inside your home or business until the problem is solved. You are urged to hire our professionals because it requires you to be near electricity and water, which can be very dangerous.
- Drought and flooding. Frequent droughts may cause damage to your pump if the water level drops below a certain depth. Your pump may have to work harder to bring the water to the surface. Flooding from heavy rainfall in the area can also pose a risk for your well pump and your family’s safety. Areas that are prone to flooding may have more contaminants in the groundwater supply.
- Well tank bladder issues. Your well has a bladder for water storage inside the tank. If this bladder gets damaged, water may leak out, lessening the air inside the tank. When this happens, your pump will turn on and off more frequently.
Therefore, if you want to ensure you have a pump that doesn’t let you down, you should regularly inspect your system.
How Much Does Well Pump Repair Usually Cost In Windermere?
In Orange County, the average cost for well pump repair ranges from $170.00 to $1,400.00. The average cost for most homeowners is $770.00. The good news is, many factors may influence the price of your repairs. You could end up spending much less than some of your fellow neighbors, depending on these factors.
Parts and Labor
When you have issues with your well pump, you will need to pay for any required parts for your repair. The cost may be only a few dollars, or it could be a lot more, depending on your issue and what type of well you may have.
If it takes us all day to trace down and repair your problems, you will have to pay for some of our time to do it. An emergency repair to a faulty system on weekends or holidays will be more costly than a simple fix mid-week. If heavy equipment is necessary, your cost may reflect it.
The Floridan aquifer is 100 to 200 feet beneath the ground in central Florida, with some parts as much as 450-feet below. This depth generally means you will need a deep well jet pump that can go down up to 110-feet, or a submersible pump, which is usable for up to 400-feet. Either of these systems will be more expensive than a “jet” that sits above ground and is designed for water that is no more than 25-feet below the surface.
How to Avoid Costly Well Pump Repairs in Windermere?
The CDC and National Ground Water Association recommend that you take some time to care for your well and pump. You should:
- Have your system checked yearly. The easiest way to keep up with your well pump and extend its life is to have it tested. Annually, we can come out and look for signs of wear, evidence of buildup, and other symptoms that your well pump may need a little TLC.
- Test water for quality more if you notice illnesses, changes in taste, or the appearance of your water. If you start to notice an odd flavor, it could be bacteria, contaminants, or other issues that can shorten the lifespan of your well pump and other parts of your system.
- Avoid using chemicals near your well. Using harsh chemicals, insecticides, etc., near your well could damage the system and your water quality. If at all possible, you should avoid it!
- Visually inspect your well covers to ensure it sits above the ground. If you hear noises coming from your well or the pump, and you cannot call our professionals out immediately, at least look at the pump and well, the parts you can see. Look for rust, drips, and other possible warning signs.
However, this isn’t the only thing you can do to save your well and pump. For instance, if possible, do your best to conserve Florida’s water. Turn off the water when you are brushing your teeth or washing dishes, and taking shorter showers are some options. The benefit is that the less work your pump has to do, the longer it will last you. If it isn’t possible for you to cut back on your water usage any more than you already do, you may consider a pump with a larger motor.
When Do You Need Permits for Well Pump Repair In Windermere?
According to the Southwest Florida Water Management District, plumbing permits are required for:
- New wells
- Repair or modification of existing wells
- Abandonment of a well
- Well testing
- Well monitoring
- Test holes that will be converted to a water use well
Along with this, you may also need a consumptive water user permit if you are establishing a well for a single-family home, a duplex with only one well, or wells that may be used for firefighting.
To apply for a permit in Windermere, you will need to fill out a permit application form and include:
- A diagram of your plumbing waste riser
- Water heater location
- And fixture locations
When dealing with a well pump repair, you should also assume that diagrams are likely necessary, mainly if significant repairs occur. The permit form should be filled out by you and our professional plumbers and well repair specialists. You will also be expected to pay for the permit upon submission of the permitting forms.